Insulation removal
Old, wet, compressed or pest-damaged insulation vacuumed out and hauled away, so new insulation starts on a clean attic.
Learn more about insulation removalPier-and-beam homes
A vapor barrier over the ground, then closed cell spray foam over the liner, up the walls and into the rim joist. Your crawlspace becomes part of your home's building envelope, and ground moisture and humid air stay out.
How it works
Pier-and-beam homes sit over a crawlspace with a dirt floor and vents open to the outside. Moisture from the ground and humid summer air collect under the house and work their way up through the floor.
Encapsulation brings the crawlspace inside your home's building envelope. A vapor barrier covers the ground with overlapped, taped seams and runs onto the foundation walls. Then we spray closed cell foam over the edge of the liner, up to the top of the walls and into the rim joist, and seal the vents.
The foam locks the liner to the wall so air and moisture can't slip in behind it, and it insulates and air seals the walls and rim joist in one step.
A sealed crawlspace still needs a way to stay dry. Building code calls for a dehumidifier, a small supply of conditioned air or a continuously running exhaust fan. We'll go over which one fits your home during the inspection.
Average heating and cooling energy savings for homes on closed crawlspaces in a U.S. DOE-sponsored field study of North Carolina homes.
Source: U.S. DOE (OSTI), closed crawl space performance study
What's included
We check for standing water, mold, pests and old insulation, and note anything that needs fixing first.
Debris and fallen or wet insulation are removed before the liner goes down.
A heavy liner over the ground, seams overlapped and taped, run onto the foundation walls.
Foundation vents and other openings to the outside are closed and sealed.
Sprayed over the edge of the liner, up to the top of the foundation walls and into the rim joist. It seals the liner in place and insulates the walls.
Your quote lists how the sealed space stays dry: a dehumidifier, conditioned air or an exhaust fan.
How the job goes
We check for water, mold, pests, old insulation and open vents, and list anything that needs fixing first.
Debris and old insulation come out so the liner goes down on a clean surface.
The liner goes down with taped seams, then closed cell foam goes over it, up the walls and into the rim joist. The vents are sealed.
We show you the finished crawlspace and go over how it stays dry.
FAQ
Don't see yours? Call (940) 245-6139 and ask us directly.
If your home sits on piers and beams with a short space under the floor, yes. Most newer North Texas homes are built on a slab and don't have one.
A plain vapor barrier is a sheet of plastic laid on the dirt. Encapsulation goes further. We spray closed cell foam over the liner, up the walls and into the rim joist, and seal the vents, so the crawlspace becomes part of your home's building envelope.
The foam seals the liner to the wall so air and moisture can't get in behind it. It also insulates and air seals the walls and rim joist, so the whole crawlspace is sealed from the ground up.
No. Once the crawlspace is sealed, the vents are closed off. Building code then requires a way to keep the space dry, such as a dehumidifier, a small supply of conditioned air or an exhaust fan.
It depends on the size of the crawlspace and how much needs to be cleared out first. Your quote lists the schedule.
Free quote
Tell us about your home. We'll call to set up a free inspection and give you a written quote.