Spray foam insulation
Foam sprayed against the roof deck and into walls. It insulates and seals air leaks in one step, so the attic stays close to room temperature.
Learn more about spray foam insulationShops, barns and metal buildings
Shop and metal building insulation
Spray foam for shops, barns, detached garages and metal buildings. It stops condensation dripping off the panels and keeps the space usable through a Texas summer.
- Locally owned
- Free in-home inspection
- Written, upfront quotes
How it works
Stop the sweat, hold the temperature
Bare metal panels heat up fast in the sun and cool off overnight. When warm, humid air hits a cold panel, water condenses and drips onto whatever's below.
Closed cell spray foam bonds directly to the panels and framing. It insulates and works as a vapor retarder, so moist air can't reach the cold metal.
Open cell foam can be an option in some buildings, depending on how the space is used and whether it's air conditioned. We'll recommend the right foam for yours.
R-7
Approximate R-value per inch of closed cell spray foam, which also works as a vapor retarder at typical thickness.
What's included
What we cover
Roof panels
Foam sprayed directly to the underside of the roof panels.
Walls
Foam on the wall panels, top to bottom.
Framing and purlins
Foam covers framing to cut down on heat moving through the steel.
Gaps and seams
Foam seals the gaps where panels meet framing and trim.
Masking
Windows, doors and equipment are covered before we spray.
Thickness in writing
Your quote lists the foam type and thickness for each area.
How the job goes
From first call to finished
- 01
Walk the building
We measure the space, check how it's used and recommend foam type and thickness.
- 02
Prep and mask
We cover windows, doors and anything that can't be moved.
- 03
Spray
Foam goes on the roof and walls to the thickness in your quote.
- 04
Clean up and walk through
We pull the masking, clean up and walk you through the finished space.
FAQ
Questions about shops and metal buildings
Don't see yours? Call (940) 245-6139 and ask us directly.
Open cell or closed cell for a metal building?
Closed cell is the usual choice because it stops condensation on the panels. Open cell can work in some conditioned buildings. We'll recommend one after we see the space.
Can you spray a building that's full of stuff?
Yes. We mask and cover equipment, vehicles and stored items, or ask you to move what can't be covered.
Do I need to stay out of the building?
Yes, while we spray and for the re-entry time the foam manufacturer sets. We'll give you the exact time for the product we use.
Free quote
Get a free quote
Tell us about your home. We'll call to set up a free inspection and give you a written quote.
- We call you at the time you pick to set up your inspection.
- We inspect your attic, insulation and ductwork.
- You get a written quote with options and prices.
Preview only
Looks good, nothing was sent
Forms only send from the live site. Once it's on Netlify, each request and its photos are saved under Forms in Netlify and emailed to you.