Roof deck and walls

Spray foam insulation

Open cell or closed cell foam sprayed against the underside of your roof deck and into walls. It insulates and air seals in one step, and brings the attic and the ductwork in it inside your conditioned space.

  • Locally owned
  • Free in-home inspection
  • Written, upfront quotes

How it works

Insulate and seal in one step

Spray foam goes on as a liquid and expands to fill gaps, cracks and joints. Once it cures, it's an air barrier as well as insulation, which batts and loose fill can't do on their own.

In most North Texas homes, we spray the underside of the roof deck and the gable walls. That moves the insulation line from the attic floor up to the roofline, so the attic and your ductwork sit inside the conditioned space instead of in a superheated attic.

Spray foam takes trained crews, the right equipment and good ventilation during the job. Everyone needs to stay out of the house while we spray and for the re-entry time the foam manufacturer sets. We'll give you the exact time for the product we use.

R-3.6 / R-7

Approximate R-value per inch for open cell and closed cell spray foam.

Your options

Open cell or closed cell

Both stop air leaks. They differ in density, R-value per inch and how they handle moisture.

Open cell

Density
Light and soft, about 0.5 lb per cubic foot
R-value per inch
About R-3.6
Moisture
Stops air, but lets water vapor pass
Typical use
Underside of the roof deck in homes, exterior walls and gables

Closed cell

Density
Dense and rigid, about 2 lb per cubic foot
R-value per inch
About R-7
Moisture
Stops air and works as a vapor retarder
Typical use
Crawlspaces and metal buildings that need a vapor retarder

How the job goes

From first call to finished

  1. 01

    Inspect and plan

    We check the roof deck, ventilation, attic access and any gas appliances, then quote foam type and thickness.

  2. 02

    Remove old insulation

    The insulation on your attic floor comes out before any foam goes in.

  3. 03

    Prep and spray

    We cover floors, vents and anything near the work area, then spray to the thickness in your quote.

  4. 04

    Clean up and walk through

    We show you the finished work, clean up and confirm when it's safe to come back in.

FAQ

Questions about spray foam insulation

Don't see yours? Call (940) 245-6139 and ask us directly.

Do I need to leave the house?

Yes, for part of the job. Everyone, including pets, should be out while we spray and for the re-entry time the foam manufacturer sets. We'll tell you the exact time.

Why do I have to remove the insulation on my attic floor?

Once the roof deck is foamed, the attic becomes part of your home's building envelope, and its air is part of the air you breathe. Old floor insulation holds dust and debris, and it can absorb VOCs given off while the foam is installed. Removing it first keeps the air in your home clean. We require it on every spray foam attic.

Does a foamed attic still need vents?

No. Foam on the roof deck makes the attic part of the house, so the attic vents are sealed off. It's no longer vented to the outside.

Open cell or closed cell?

Most homes use open cell under the roof deck, in exterior walls and on gables. Closed cell is used where you need more R-value per inch or a vapor retarder. We'll recommend one after the inspection.

Free quote

Get a free quote

Tell us about your home. We'll call to set up a free inspection and give you a written quote.

Prefer to talk? (940) 245-6139 Mon to Fri, 8am to 6pm
  1. We call you at the time you pick to set up your inspection.
  2. We inspect your attic, insulation and ductwork.
  3. You get a written quote with options and prices.
Best time to call
Photos (optional)

    We use your information only to contact you about your quote.

    Call now Free quote